Product instructions
Cleaner & Degreaser
- Apply the Cleaner: Spray FireSudz Cleaner & Degreaser directly onto the surface you wish to clean. For optimal results in your fire truck cleaning and apparatus wash, use a towel to agitate the area.
- For Tough Stains: For more intensive cleaning, especially on stubborn spots, use a carpet brush to agitate the surface, ensuring a thorough fire apparatus wash.
- Wipe and Dry: Wipe the surface immediately with a clean towel or cloth and allow it to air dry, leaving your fire truck spotless and ready for action.
Apparatus Wash
- Prepare the Wash Solution: Pour 1 to 2 ounces (1 to 2 capfuls) of FireSudz Apparatus Wash into a clean 5-gallon wash pail. Fill the pail with pressurized water to create a rich foam, ensuring the best results for your fire apparatus wash. Apply the solution only to a cool surface.
- Using a Foam Cannon: Add 2 to 3 ounces of FireSudz Apparatus Wash to the foam cannon, then fill with water. For extra-thick foam, add an additional 2 to 3 ounces of soap, perfect for effective fire truck cleaning.
- Apply and Agitate: Begin washing from the top of the apparatus and work downward. Use a wash mitt, mop, or soft brush to apply the soap with gentle agitation to break up stubborn grime during the fire apparatus wash.
- Rinse and Dry: Rinse the apparatus immediately with water to remove loose dirt and grime. Wipe dry with a clean, soft microfiber towel, leaving your fire truck looking its best.
Water Spot Remover
- Gather Your Supplies: Begin by using two clean microfiber towels. Focus on the areas of your fire apparatus with visible water spots and buildup.
- Apply the Water Spot Remover: Apply the Water Spot Remover to a small section, about 2-3 feet at a time. Use one towel to spray and gently wipe the area, ensuring even coverage for effective fire truck cleaning.
- Wipe Off Residue: Once the section is treated, flip the towel to a clean side or use a fresh towel to wipe off residue and polish the surface, enhancing the results of your fire apparatus wash.
- Continue the Process: Continue working around the apparatus, using a new microfiber towel as needed for the best results in removing stubborn water spots.
Spray Wax
- Spray the Wax: Achieving a brilliant shine with FireSudz Spray Wax is simple and quick. Just spray the wax onto the clean surface of your fire apparatus, including painted areas and trim.
- Buff the Surface: Use a clean, soft microfiber towel to evenly spread and buff the wax. This will enhance the appearance of your fire apparatus with a sleek, glossy finish.
- Enjoy the Results: No complicated steps—just spray, buff, and enjoy the enhanced appearance of your fire apparatus after fire truck cleaning.
Tire Shine
- Spray the Tire Shine: Spray FireSudz Tire Shine directly onto the tire surface of your fire apparatus.
- Let it Penetrate: Allow the product to sit for a moment to penetrate and enhance the shine.
- Buff for Even Coverage: Use a clean, soft microfiber towel to evenly spread and buff the shine for optimal fire truck cleaning results. (Optional)
- Achieve the Finish: Let the product sit to achieve a wet, glossy finish that showcases your fire apparatus.
Glass Cleaner
- Apply the Glass Cleaner: Apply the glass cleaner directly to the glass surface of your fire apparatus, using a light, even spray to avoid overspray and ensure precise cleaning.
- Wipe the Surface: Immediately wipe the surface of your fire apparatus with a clean, premium microfiber towel, using gentle, circular motions to remove any residues and achieve a streak-free finish.
- Buff for Clarity: For best results, use a second dry microfiber towel to buff the glass of your fire apparatus, enhancing clarity and ensuring no streaks or smudges remain.